DSP-01 and DSP-02 dispensers
DSP-01 dispenser is designed for easy, fast and exact dosing liquids and pastes. Amount of given material deposit is determined by combination of air pressure, dosing point size, and pulse length. DSP-01 dispenser can operate either in a free mode when the pulse length is given by the foot pedal pressing time, or in a controlled mode when the pulse time is given by the value set on the timer.
For dispensing liquids and pastes of low viscosity, the dispenser is provided with the feature of controlled underpressure. Consequently, when output pressure for dispensing not enabled, back suction on the output can be controlled so that dispensed liquid or paste dropping avoided.
Dispensing functions:
|
Hand Dispenser dispenses only for the pedal. 1) pressing the pedal 2) releasing the pedal |
 |
|
Tact Dispenser dispenses the same amount every pedal. Programmable up to 20-time values doses. "a" time value the arrows indicate depressing the pedal |
 |
The DSP-02 dispenser is designed for easy, fast and exact dosing liquids and pastes. A bulk of given material deposit is determined by the combination of the air pressure, dosing tip size, and pulse duration. The DSP-02 dispenser can operate either in a free mode when the pulse duration is determined by the foot pedal grip time, or in a controlled mode when the pulse duration is determined by the value set in the program.
For the sake of dispensing liquids and pastes with low viscosity, the dispenser is provided with a controlled vacuum feature. Accordingly, when the dispensing output pressure disabled, the back intake on the output can be controlled so that the dispensed liquid or paste dripping down cannot occur.
|
Hand Dispenser dispenses only for the pedal. 1) pressing the pedal 2) releasing the pedal |
|
|
Tact Dispenser dispenses the same amount every pedal. Programmable up to 20-time values doses. "a" time value the arrows indicate depressing the pedal |
|
|
Sequence Dispenser dispenses programmed (can be of different lengths) consecutive time value (up to 32 different values) doses of activated pedal. The batch sequence is a cycle that is repeated (up to 20 cycles). "a,b,c,d" time values the arrows indicate pressing the pedal |
 |
|
Auto single Fully programmable mode. Programming the length of the dose and the length of the gap. The batch sequence and gaps in the cycle. Each cycle is activated pedal. "a,b,c" time value of dose "b,c" time value of gap the arrows indicate pressing the pedal |
 |
|
Auto continue Fully programmable mode. Programming the length of the dose and the length of the gap. The batch sequence with gaps in the cycle. The cycles are continuously repeated after activating pedal. "a,b,c" time value of dose "b,c" time value of gap the arrows indicate pressing the pedal |
 |
